Education
|
2013, AGH University of Science and Technology, Krakow, Poland |
|
2013, Université Paris 13, LSPM, Villetaneuse, France |
|
2009, AGH University of Science and Technology, Krakow, Poland |
|
2004, School of Technology and Economics, Skawina, Poland |
Research stays abroad
- Los Alamos National Laboratory, Material Science and Technology Division, Los Alamos, NM, USA (2016-2018) - in total 18 weeks
- Joint institute of Nuclear Research, Dubna, Russia (2015-2018) - in total 8 weeks
- Technical University of Denmark Risø Campus, Department of Wind Energy Roskilde, Denmark (2015) - 5 weeks
- Ecole nationale d'ingénieurs de Metz, Laboratoire de mécanique Biomécanique Polymère des structures (LaBPS), France (2014-2016,2018) - in total 5 week
- Université Paris 13,Laboratoire des Sciences des Procédés et des Matériaux (LSPM), Centre National de la Recherche Scientifique (CNRS), France – financed by the French side (2009-2015) - in total 10 months
- Complex Metalic Alloys. 4th European School in Materials Science, Ljubljana, Slovenia (2009) -1 week
- Université Paris 13, Laboratoire des Sciences des Procédés et des Matériaux (LSPM), Centre National de la Recherche Scientifique (CNRS), France – French Government Scholarship (2008) - 2 months
- Complex Metalic Alloys. 3rd European School in Materials Science, Ljubljana, Słowenia (2008) - 1 week
List of Publications
Publications from JCR list
- S. Wroński, K. Wierzbanowski, B. Bacroix, M. Wróbel, E. Rauch, F. Montheillet, M. Wroński , “Texture heterogeneity of asymmetrically rolled low carbon steel”, Archives of Metallurgy and Materials, vol. 54, pp. 89-102, 2009
- K. Wierzbanowski, M. Wroński , A. Baczmański, B. Bacroix, P. Lipinski and A. Lodini, “Problem of lattice rotation due to plastic deformation. Example of rolling of f.c.c materials”, Archives of Metallurgy and Materials, vol. 56, pp. 575-584, 2011
- M. Wroński , K. Wierzbanowski and T. Leffers, “On the lattice rotations accompanying slip”, Materials Science and Technology, vol. 29, pp. 129-133, 2013
- S. Wroński, K. Wierzbanowski, M. Wroński , B. Bacroix, “Three Dimensional Analysis of Asymmetric Rolling with Flat and Inclined Entry”, Archives of Metallurgy and Materials, vol. 59, pp.595-601, 2014
- K. Wierzbanowski, M. Wroński , T. Leffers, "FCC rolling textures reviewed in the light of quantitative comparisons between simulated and experimental textures", Critical Reviews in Solid State and Materials Sciences, vol. 39, pp.391-422 2014
- M. Wroński , K. Wierzbanowski, S. Wronski, B. Bacroix, P. Lipinski, "Texture variation in asymmetrically rolled titanium. Study by Finite Element Method with implemented crystalline model", International Journal of Mechanical Sciences, vol. 87, pp. 258-267, 2014
- M. Szewczyk, W. Piasecki, M. Wroński, K. Kutorasiński, "New concept for VFTO attenuation in GIS with modified disconnector contact system", IEEE Transactions on Power Delivery, IEEE Transactions on Power Delivery, vol. 30, no. 5 pp. 2138–2145, 2015
- K. Kowalczyk-Gajewska, K. Sztwiertnia, J. Kawałko, K. Wierzbanowski, M. Wroński , K. Frydrych, S. Stupkiewicz, H. Petryk, "Texture evolution in titanium on complex deformation paths: experiment and modelling", Materials Science and Engineering: A, vol. 637, pp. 251–263, 2015
- M. Wroński, K. Wierzbanowski, M. Wrobel, S. Wronski, B. Bacroix, "The effect of rolling asymmetry on selected properties of grade 2 titanium sheet", Metals and Materials International, vol. 21, no.5 pp. 805-814, 2015
- S. Wronski, K. Wierzbanowski, M. Jedrychowski, J. Tarasiuk, M. Wroński, A. Baczmanski, B.Bacroix, "Microstructure evolution of titanium after tensile test", Materials Science and Engineering A, vol. 656, pp. 1–11, 2016
- A. Uniwersał, M.Wróbel, K. Wierzbanowski, S. Wroński, M. Wroński, I. Kalemba-Rec, T. Sak, B. Bacroix, Microstructure, texture and mechanical characteristics of asymmetrically rolled polycrystalline copper, Materials Characterization, vol. 118, pp. 575-583, 2016
- M. Wronski, k. Wierzbanowski, S. Wronski, B. Bacroix, P. Lipinski, Experimental and finite element analysis of asymmetric rolling of 6061 aluminum alloy using two-scale elasto-plastic constitutive relation, Archives of Metallurgy and Materials vol. 62, no. 4, pp.1991-1999, 2017
- A. Uniwersał, M. Wroński, M. Wróbel, K. Wierzbanowski, A. Baczmański, Texture effects due to asymmetric rolling of polycrystalline copper, Acta Materialia, vol. 139, pp. 30-38, 2017
- M. Arul Kumar, M. Wroński, R.J. McCabe, L. Capolungo, K. Wierzbanowski, C.N. Tomé, Role of microstructure on twin nucleation and growth in HCP titanium: A statistical study. Acta Materialia vol. 148, pp.123-132, 2018
- M. Wroński, M. Arul Kumar, L. Capolungo, R.J. McCabe, K. Wierzbanowski, C.N. Tomé, Deformation behavior of CP-titanium: Experiment and Crystal plasticity modeling, Materials Science & Engineering A, vol. 724, pp. 289–297, 2018
- M. Wroński, K. Wierzbanowski, D. Wojtas, E. Szyfner, R. Z. Valiev, J. Kawałko, K. Berent, K. Sztwiertnia, Microstructure, Texture and Mechanical Properties of Titanium Grade 2 Processed by ECAP (Route C), Metals and Materials International, https://doi.org/10.1007/s12540-018-0096-5, 2018
Other publications
- S. Wroński, K. Wierzbanowski, B. Bacroix, M. Wróbel, T. Chauveau and M. Wroński , “Crystallographic Textures Variation in Asymmetrically Rolled Steel”, Mater. Sci. Forum, vol. 638-642, pp. 2811-2816, 2010
- M. Wroński , K. Wierzbanowski, A. Baczmański, P. Lipiński, B. Bacroix, W. Seiler and A. Lodini, “Influence of grain-matrix interaction intensity and lattice rotation definition on predicted residual stresses and textures”, Mater. Sci. Forum, vol. 681, pp. 405-410, 2011
- K. Wierzbanowski, M. Wroński , A. Baczmański, B. Bacroix, P. Lipinski and A. Lodini, “Some comments on lattice rotation in aspect of brass-copper texture transition”, Mater. Sci. Forum, vol. 702-703, pp. 212-215, 2012
- K. Wierzbanowski, A. Baczmanski, R. Wawszczak, M. Wroński , M. Wróbel, A. Lodini, C. Braham, W. Seiler, “Residual stress in ferrite and austenite during rolling and recovery processes”, Mater. Sci. Forum, vol. 772, pp. 79-83, 2014
- K. Wierzbanowski, M. Wroński , A. Baczmanski, P. Lipinski, B. Bacroix, A. Lodini, “Effect of intergranular interaction and lattice rotation on predicted residual stress and textures. Case of austenite and ferrite”, Mater. Sci. Forum, vol. 772, pp. 97-101, 2014
- M. Wroński , K. Wierzbanowski, L. Pytlik, B. Bacroix, M. Wróbel, A. Baczmanski, A. Lodini, "Study of Microstructure, Texture and Residual Stress in Asymmetrically Rolled Titanium" , Mater. Sci. Forum, vol. 777, pp. 1-6, 2014
- M. Wroński , K. Wierzbanowski, L. Pytlik, B. Bacroix, P. Lipinski, "Study of Asymmetric Rolling of Titanium by Finite Elements Method with Implemented Crystalline Model", Mater. Sci. Forum, vol. 777, pp.65-70, 2014
- K. Wierzbanowski, M. Kotra, M. Wroński , K. Sztwiertnia, "Modeling of recrystallization texture of rolled polycrystalline aluminium", Advanced Material Research, vol. 936, pp.505-508, 2014
- M. Wroński , K. Wierzbanowski, S. Wronski, B. Bacroix, M. Wróbel, A. Uniwersał, "Study of Texture, Microstructure and Mechanical Properties of Asymmetrically Rolled Aluminium", IOP Conf. Series: Material Science and Engineering, vol. 82, 012074, 2014
- M. Wroński , K. Wierzbanowski, T. Leffers, "Quantitative Comparison Between Simulated and Experimental FCC Rolling Textures", IOP Conf. Series: Material Science and Engineering, vol. 82, 012011, 2014
- M. Wroński , K. Wierzbanowski, B. Bacroix, P. Lipinski, "Asymmetric rolling textures of aluminium studied with crystalline model implemented into FEM", IOP Conf. Series: Material Science and Engineering, vol. 82, 012012, 2014
- K. Wierzbanowski , M. Kotra, M. Wroński , K. Sztwiertni, S. Wronski, A. Lodini, "Modeling of recrystallization texture of symmetrically and asymmetrically rolled polycrystalline aluminium", IOP Conf. Series: Material Science and Engineering, vol. 82, 012039, 2014
List of Conferences
Conference participation
- K. Wierzbanowski, M. Wroński , A. Baczmanski, P. Lipinski, B. Bacroix, A. Lodini, “Influence of intergranular interaction and lattice rotation on predicted residual stress and texture”, Abstracts of 6th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation (MECA SENS VI), p. 33, Hamburg, Germany, 2011
- M. Wroński , K. Wierzbanowski, S. Wroński, B. Bacroix and M. Wróbel, “Modification of polycrystalline metal properties by asymmetric rolling. Example of titanium”, Annual Meeting of: European integrated centre for the development of Metallic Alloys and Compounds (C-MAC), Proceedings of C-MAC Days, p. 40, AGH University of Science and Technology, Kraków, Poland, 2012
- M. Wroński , “Implementation of polycrystalline deformation model into finite elements method code”, Proceedings of the ISD Workshops, Faculty of Physics and Applied Computer Science AGH University of Science and Technology, pp. 45-48, Kraków, Poland, 2013
- M. Wroński , K. Wierzbanowski, T. Leffers, Quantitative Comparison Between Simulated and Experimental FCC Rolling Textures, 17-th Int.Conf. on Textures of Materials (ICOTOM17), Conference Program -Book of Abstracts, Technische Universität Dresden, p. 115, Germany, 2014
- M. Wroński , K. Wierzbanowski, B. Bacroix, P. Lipinski, Asymmetric rolling textures of aluminium studied with crystalline model implemented into FEM, 17-th Int.Conf. on Textures of Materials (ICOTOM17), ), Conference Program -Book of Abstracts, Technische Universität Dresden, p. 139, Germany, 2014
Other participation
- S. Wroński, K. Wierzbanowski, B. Bacroix, M. Wróbel, T. Chauveau and M. Wroński , “Crystallographic Textures Variation in Asymmetrically Rolled Steel”, Abstracts of Int. Conf.: THERMEC, p. 276, Berlin, 2009
- K. Wierzbanowski, M. Wroński , A. Baczmański, “Two Approaches to Lattice Rotation in Plastic deformation Models”, Conference Proceedings : Frontiers in Modern Physics and Applications, Faculty of Physics and Applied Computer Science, AGH University of Science and Technology, pp. 115-117, Kraków, 2009
- K. Wierzbanowski, A. Baczmański, J. Tarasiuk, P. Lipiński and M. Wroński , “Mechanical model predictions for Al3Mg2 alloy”, Abstracts of the 1st International Conference on Complex Metallic Alloys and their Complexity (C-MAC 1), p. 19, Nancy, France, 2009
- M. Wroński , K. Wierzbanowski, A. Baczmański, P. Lipiński and A. Lodini, “Influence of grain-matrix interaction intensity and lattice rotation definition on predicted residual stresses and textures”, 8-th European Conference on Residual Stress (ECRS8), - Book of Abstracts p. 37, La Garda, Italy, 2010
- M. Wroński , K. Wierzbanowski, A. Baczmański, J. Tarasiuk, P. Lipiński and S. Wroński, “Predictions of mechanical properties of -Al-Mg alloy- Example of compression and rolling”, Poster Session Abstracts of Int. Conf.: C-MAC Days, p. 19, Max Planck Institute for Chemical Physics of Solids, Dresden, Germany, 2010
- K. Wierzbanowski, A. Baczmański, R. Wawszczak, M. Wroński , M. Wróbel, A. Lodini, C. Braham, W. Seiler, “Residual stress in ferrite and austenite during rolling and recovery processes”, 6th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation (MECA SENS VI), Book of Abstracts, p. 28 , Hamburg, Germany, 2011
- K. Wierzbanowski, M. Wroński , A. Baczmański, B. Bacroix, P. Lipinski and A. Lodini, “Some comments on lattice rotation in aspect of brass-copper texture transition”, Abstracts of 16-th Int. Conf. on Textures on Materials (ICOTOM 16), Bombay, India, 2011
- K. Wierzbanowski, M. Wroński , A. Baczmański and S. Wroński, “Effect of intergranular interaction and lattice rotation on predicted residual stress and texture for polycrystalline metals”, Program for CMAC Days Abstract Booklet, p. 35, University of Liverpool, UK, 2011
- M. Wroński , K. Wierzbanowski, S. Wronski, B. Bacroix, A. Lodini, P. Lipinski, "Study of texture development in asymmetrically rolled titanium. Experimental study and calculations", Colloque de l’Association Française de Cristallographie, Programme et résumés, p.115, Université de Bordeaux, France, 2013
- M. Wroński , K. Wierzbanowski, L. Pytlik, B. Bacroix, M. Wróbel, A. Baczmanski, A. Lodini, "Study of Microstructure, Texture and Residual Stress in Asymmetrically Rolled Titanium" , 7th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation (MECA SENS 7), Sydney, Book of Abstracts, p. 157, Sydney, Australia, 2013
- M. Wroński , K. Wierzbanowski, L. Pytlik, B. Bacroix, P. Lipinski, Study of Asymmetric Rolling of Titanium by Finite Elements Method with Implemented Crystalline Model, 7th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation (MECA SENS 7), Sydney, Book of Abstracts, p. 46, Sydney, Australia, 2013
- M. Wroński , K. Wierzbanowski, A. Baczmanski, S. Wronski, B. Bacroix, M. Wróbel, A. Lodini, Modification of stress and texture distributions in asymmetrically rolled titanium, Abstracts of 9-th European Conference on Residual Stress (ECRS9), Troyes, France, 2014
- K. Wierzbanowski, M. Kotra, M. Wroński , K. Sztwiertnia, Modeling of Recrystallization Texture of Rolled Polycrystalline Aluminium, MSET2014 International Conference on Materials Science and Engineering Technology, Conference Program, p. 6, East China University of Science and Technology, Zhejiang University, Shanghai, China, 2014
- M. Wroński , K. Wierzbanowski, S. Wronski, B. Bacroix, M. Wróbel, A. Uniwersał, Study of Texture, Microstructure and Mechanical Properties of Asymmetrically Rolled Aluminium, 17-th Int.Conf. on Textures of Materials (ICOTOM17), ), Conference Program -Book of Abstracts, Technische Universität Dresden, p. 144, Germany, 2014
- K. Wierzbanowski , M. Kotra, M. Wroński , K. Sztwiertni, S. Wronski, A. Lodini, Modeling of recrystallization texture of symmetrically and asymmetrically rolled polycrystalline aluminium, 17-th Int.Conf. on Textures of Materials (ICOTOM17), Conference Program -Book of Abstracts, Technische Universität Dresden, p. 97, Germany, 2014